Factory Manufacturer SMT Pick and Place Making Machine SMD BGA HW-T6-64F HWGC auto&semi-auto solder past printer chip mounter
Automatic PCB loader
The SMT placement machine can directly put the printing finished PCB board onto the track to realize automatic board loading, aiming and placing and mounting. It supports multi-feeders: maximum 50 feeders. The size of standard IC tray, tube feeder, stick feeder can be adjustable.
Synchronous identification by four sets of cameras
The SMT placement machine is equipped with 6 cameras: one MARK, one high precision camera and 4 high-speed cameras. It can realize 4-head synchronous identification to ensure the speed and precision of mounting. The standard configuration is 16 JUKI high precision suction nozzles.
Servo system
The SMT placement machine is equipped with servo system imported from Panasonic, Japan with high precision and stability to ensure 24-hour stable mounting.
Chain
It adopts high pressure resistant and wear-proof drag chain which is the same type as the one of imported machines. The drag chain can bear thousands of times of proof pressure.
Track
It adopts high precision track from TBI Taiwan which has low noise and high precision to ensure the accuracy rate of BGA chips.
Conveyor
This SMT placement machine can be automatically connected to conveyor which can transport the PCB board to the SMT reflow soldering machine without manual assistant, thus saving labor cost.
Technical Parameter:
| Specification |
| Number of feeders |
50 |
| XYZ Drive Guide Rail |
High-precision heavy-duty straight-line guide rail |
| Number of cameras |
6 |
| Number of heads |
4 |
| Average power |
400W |
| PCB board into |
automatic board |
| Guide |
Screw guide |
| Maximum mounting speed |
9500 Pcs/h |
| Average mounting speed of actual mounting resistance |
8000Pcs/h |
| Mounter Precision range |
0201-40 * 40 mm, 0.3 mm pin spacing chips |
| Maximum travel scope in Z axis |
20mm |
| Maximum circuit board area |
400×200mm |
| Positioning precision |
0.01mm |
| The buffer range of suction nozzle |
4.5mm |
| Weight |
300KG |
| Dimension |
900*1140*900mm |
| Power supply |
220V, 50/60Hz or 110V |
| Compressed air |
0.6-0.7Mpa |
| Drive motor |
Panasonic servo motor |
| Motion drive system |
Panasonic high-speed DSP drive |
| Recognition mode |
Simultaneous recognition of four heads |
| Vacuum source of suction nozzle |
High-speed on-off vacuum generator with vacuum breaker |
| Operating system |
Full-automatic chip mounter operating system operating system. |
| Independently developed by us based on Windows operating system |
| Supports windows xp, win7 |
| Element angle |
0-360°synchronous rotation during movement |
| X/Y operation mode |
Intelligent curve of the linear acceleration and deceleration linkage |
| MARK point positioning |
Full-automatic (the MARK point can be adjust at will) |
| Intelligent alarm |
Automatic correction, automatic filling, feeding shortage alarm |
| Plate entering mode |
Automatic connection from left to right in single sections |
| Automatic PCB transfer positioning/plunger positioning, manual plate feeding |
| Visual display |
17-inch industrial control display, 4:3, resolution: 1280 x1024 |
| Number of recognition cameras |
One Mark recognition camera, four quick-recognition cameras |
| One precise-recognition camera. |
| Adaptive mounting scope |
Adaptive to 0201 0402, 0603, 0805, 1206, diode, audion, SOT, QFP |
| Within 40*40mm and the pin distance ≥0.3mm |
Introduction
The machine SMT880 with 8 heads+10 cameras+80pcs feeders+Three stage track+Panasonic servo motor+Screw guide.
Feature
1. Three stage track.
2. Panasonic servo motor.
3. Screw Guide.
4. 8 Heads+10 cameras +80 feeders.
Part List
1. Pick and place machine:1 Set
2. IC fixed support:4 Set(Four M5*8,Four M5*20 screw)
3. JUKI nozzle:20Pcs(502*4,503*6,504*6,505*3,506*1)
4. Solid alibrate nozzle:8 Pcs
5. Power wire:1 Pcs(A machine external power supply)
6. Fixed foot:4 Pcs(Three coats)
7. The keyboard and mouse:1 Set
8. Nozzle calibration inkpad:1 box
9. Lubricant:1 Pcs
10. I3 industrial control PC (with key):1 Set
11. 17 inch liquid crystal display:1 Set(Display*1, VGA line*1, power line*1)
12. Bracket:2 Set(Display bracket*1 keyboard and mouse bracket*1)
13. Conveyor connection line:2 Pcs
14. Camera parameter adjustment line:1 Pcs(Plug*3)
15. Handle:2 Pcs(M4*6 screw*6)
16. Seal ring of feeder:10 Pcs
The SMT880 software was developed by ourselves. The software is available in English. And our software will be updated, as soon as there is an update, the salesman will send new software to your mailbox.
The SMT880 machine has one year warranty, lifetime maintenance. We have a professional after-sales team. As long as there is a problem with the machine within one year after purchase, we will repair it for free. If there is a need to replace the accessories, we will send them to your hands for free.(Generally we use TNT/DHL. 3-5 business days to your hands)
