The highlight of this new device increased Professional mounting chip 500 million pixels High definition imported industrial grade calibration camera as well as 500 million pixel high-definition distortion free industrial visual lens;After technical breakthroughs to improve Can be mounted 40*40mm Within the scope 0.2mm foot spacing(0.5mm center distance) above the chip,The success rate is higher than 98%solve it completely density chip foot as well as BGA chip Difficult to install problem. 
Part List

1. Pick and place machine:1 Set

2. IC fixed support:4 Sets(Four M5*8,Four M5*20 screw)

3. JUKI nozzle: 20PCS(502*4,503*6,504*6,505*3,506*1)

4. Solid calibrate nozzle:8 PCS

5. Power wire:1 PC(A machine external power supply)

6. Fixed foot:4 PCS(Three coats)

7. The keyboard and mouse:1 Set

8. Nozzle calibration inkpad: 1 box

9. Lubricant:1 PC

10. I3 industrial control PC (with key):1 Set

11. 17 inch display:1 Set (Display*1, VGA line*1, power line*1)

12. B racket:2 Sets(Display bracket*1 keyboard and mouse bracket*1)

13. Conveyor connection line:2 Pcs

14. Camera parameter adjustment line:1 PC(Plug*3)

15. Handle:2 PCS(M4*6 screw*6)

16. eal ring of feeder:10 PCS
 
			Specification

			Number of feeders

			80

			Number of IC tray

			8

			Number of cameras

			10

			Number of heads

			8

			Average power

			1000W

			Automatic board

			Three-stage track

			Guide

			Screw guide

			Maximum mounting speed

			15000 Pcs/h

			Average mounting speed of actual mounting resistance

			12000 Pcs/h

			Maximum travel scope in Z axis

			20mm

			Maximum circuit board area

			500×455mm

			Positioning precision

			0.01mm

			The buffer range of suction nozzle

			4.5mm

			Weight

			600KG

			Dimension

			1420*1370*1350mm

			Power supply

			110V/220V, 50/60Hz

			Compressed air

			0.5-0.6Mpa

			Drive motor

			Panasonic servo motor

			Motion drive system

			Panasonic high-speed DSP drive

			Recognition mode

			Simultaneous recognition of eight heads

			Vacuum source of suction nozzle

			High-speed on-off vacuum generator with vacuum breaker

Operating system

			Full-automatic chip mounter operating system operating system.

			Independently developed by us based on Windows operating system

			Supports windows xp, win7

			Element angle

			0-360°synchronous rotation during movement

			X/Y operation mode

			Intelligent curve of the linear acceleration and deceleration linkage

			MARK point positioning

			Full-automatic (the MARK point can be adjust at will)

			Intelligent alarm

			Automatic correction, automatic filling, feeding shortage alarm

Plate entering mode

			Automatic connection from left to right in single sections

			Automatic PCB transfer positioning/plunger positioning, manual plate feeding

			Visual display

			17-inch industrial control display, 4:3, resolution: 1280 x1024

Number of recognition cameras

			One Mark recognition camera, four quick-recognition cameras

			One precise-recognition camera.

Adaptive mounting scope

			Adaptive to 0201 0402, 0603, 0805, 1206, diode, audion, SOT, QFP

			Within 40*40mm and the pin distance ≥0.3mm (0.5mm center distance) and BGA.

PCB Soldering SMT Assembly Equipment OEM Semi Automatic Pick And Place Machine

SMT Mounting Machine

SMT Pick And Place Machine

SMT Placement Machine

SMT Chip Shooter

SMT Chip Mounter

PCB Pick And Place Machine

SMD Pick and Place Machine

Reflow Soldering Oven

Infrared Reflow Oven

SMT Reflow Oven

Solder Paste Printer

PCB Conveyor

PCB Loader Machine

PCB Soldering SMT Assembly Equipment OEM Semi Automatic Pick And Place Machine

Visual Position Placement PCB Soldering Machine LED Smt Assembly Machine HW-DSQ800-120F For PCB Board AssemblyOur Advantages

automated soldering equipment

pcb soldering machine

screw conveyor design software

Specification
Number of feeders	80
Number of IC tray	8
Number of cameras	10
Number of heads	8
Average power	1000W
Automatic board	Three-stage track
Guide	Screw guide
Maximum mounting speed	15000 Pcs/h
Average mounting speed of actual mounting resistance	12000 Pcs/h
Maximum travel scope in Z axis	20mm
Maximum circuit board area	500×455mm
Positioning precision	0.01mm
The buffer range of suction nozzle	4.5mm
Weight	600KG
Dimension	142013701350mm
Power supply	110V/220V, 50/60Hz
Compressed air	0.5-0.6Mpa
Drive motor	Panasonic servo motor
Motion drive system	Panasonic high-speed DSP drive
Recognition mode	Simultaneous recognition of eight heads
Vacuum source of suction nozzle	High-speed on-off vacuum generator with vacuum breaker
Operating system	Full-automatic chip mounter operating system operating system.
	Independently developed by us based on Windows operating system
	Supports windows xp, win7
Element angle	0-360°synchronous rotation during movement
X/Y operation mode	Intelligent curve of the linear acceleration and deceleration linkage
MARK point positioning	Full-automatic (the MARK point can be adjust at will)
Intelligent alarm	Automatic correction, automatic filling, feeding shortage alarm
Plate entering mode	Automatic connection from left to right in single sections
Plate entering mode	Automatic PCB transfer positioning/plunger positioning, manual plate feeding
Visual display	17-inch industrial control display, 4:3, resolution: 1280 x1024
Number of recognition cameras	One Mark recognition camera, four quick-recognition cameras
Number of recognition cameras	One precise-recognition camera.
Adaptive mounting scope	Adaptive to 0201 0402, 0603, 0805, 1206, diode, audion, SOT, QFP
Adaptive mounting scope	Within 40*40mm and the pin distance ≥0.3mm (0.5mm center distance) and BGA.