Automatic PCB loader
The SMT placement machine can directly put the printing finished PCB board onto the track to realize automatic board loading, aiming and placing and mounting. It supports multi-feeders: maximum 80 feeders. The size of standard IC tray, tube feeder, stick feeder can be adjustable.
Synchronous identification by eight sets of cameras
The SMT placement machine is equipped with 10 cameras: one MARK, one high precision camera and 8 high-speed cameras. It can realize 8-head synchronous identification to ensure the speed and precision of mounting. The standard configuration is 16 JUKI high precision suction nozzles.
Servo system
The SMT placement machine is equipped with servo system imported from Panasonic, Japan with high precision and stability to ensure 24-hour stable mounting.
Chain
It adopts high pressure resistant and wear-proof drag chain which is the same type as the one of imported machines. The drag chain can bear thousands of times of proof pressure.
Track
It adopts high precision track from TBI Taiwan which has low noise and high precision to ensure the accuracy rate of BGA chips.
Conveyor
This SMT placement machine can be automatically connected to conveyor which can transport the PCB board to the SMT reflow soldering machine without manual assistant, thus saving labor cost.
|
|
|
Model
|
H8
|
|
Number of placement heads
|
8(High-accuracy)
|
|
Number of feeder positions
|
80(subject to 8mm feeder)
|
|
Number of cameras
|
10
Mark camera----------------1
Fast recognition camera--8
High-precision camera----1
|
|
Number of tray
|
Support up to 48 non- feeder devices, each material can specify its coordinates within the mounting range, and further expand the
single-machine order receiving capability from the practical aspect
|
|
Positioning accuracy
|
0.01mm
|
|
Repeated Mounting Accuracy
|
0.025mm
|
|
Nozzle buffer range
|
4.5mm
|
|
Maximum Area of PCB
|
500*380mm
|
|
Maximum height of components
|
7mm(can be customized to 20mm)
|
|
Maximum moving range of Z axis
|
20mm
|
|
Maximum mounting speed
|
15000CPH
|
|
Average mounting speed
|
10000-12000CPH
|
|
Guide
|
Screw guide
|
|
Drive motor
|
Imported AC Servo Motor MINAS A6 series
|
|
Motion drive system
|
Imported high-speed DSP drive
|
|
XYZ drive guide rail
|
Double linear motion guide + double ground ball screw
|
|
Applicable mounting range
|
Suitable for 0201, 0402, 0603, 0805, 1206, diode, triode, SOT, and QFP, BGA, etc.with lead pitch ≥0.3mm (pin center distance
0.5mm) within 40 * 40mm
|
|
PCB entry mode
|
Three-stage entry automatic connection from left to right,automatic PCB
|
|
Programming method
|
Automatic programming after manually importing files of PCB coordinates
|
|
Adjusting Method of Tracks
|
Electric
|
|
Mark Positioning
|
Automatic--Manual
|
|
Recognition mode
|
Simultaneous recognition of eight heads
|
|
Tape feeder
|
8,12,16,24mm and vibrating feeder (can be attached to the tube chip)
|
